Homasote EasyPly® Roof Decking is designed for use as a structural, load-bearing decking in residential and non-residential buildings, room additions, A-frames and log homes for exposed beam construction, and for high-performance schools and offices where daylighting is designed into the structure. EasyPy comes with a 6 mil pre-finished surface of a decorative white "flitter" vinyl film.

It is not recommended for use over swimming pools or similar areas.

Advantages

• Made from 100% recycled waste paper
• Durable, structural and resilient
• Insulation values up to R-32 plus can be achieved by adding Thermasote® Nail Base Roof Insulation
• No splinters, knots of voids
• Contains no asbestos or formaldehyde additives
• Protected against termites and fungi

NOTE: Finished T&G on long edges and square on ends.
Other sizes available by special order.

Fire Resistance Ratings
Easy-ply (Flitter Vinyl)*

Method of Test	Class	Flame Spread	Smoke Developed
ASTME-84	C	100	230

Load table

Panel Thickness	Max. rafter spacing for live loads of:* 40 PSF 50 PSF A-Frame
2-1/16"	48"	48"	48"

*Spans are limited by 1/180 deflection expressed in lbs. per square foot of roof area projected on a horizontal plane and over two or more spans. 10 PSF dead load assumed.

Code Compliances
BOCA Research Report No. 84-65
ICBO Report No. 1016
FHA Materials Release No. 1150a
SBCC Report No. 2308